Toshiba GR-RM424WE-PMA, Руководство пользователя

Страница: 43 / 60

10 11 12 13 14 15 16 17
Notes
Before ice making/the water for ice making
●
Be sure to wash the water tank with water first before use.
●
Purified water is recommended.
Ice making time and ice storage capacity
●
Ice making time
When using mineral water for
ice making, please use the
mineral water with a hardness
value below 100 mg/L.
Hardness
value is
below
100 mg/L
Automatic Ice Maker
Continued
●
Do not put in hot water above 60°C, or liquids other than clean water such as
fruit juice, otherwise, malfunction will be caused.
●
Please dump the ice cubes made in the first time (about 30). The ice cubes
made in the first time may have peculiar smell or dirt.
Ordinary ice making When ice cubes are flattened and ice
making continues
When ice cubes pile up in some areas
or the door of the ice making chamber
is not opened or closed
When the ambient
temperature is high, the
ice making time may
exceed one day.
About 150
About 50
~
100
Quick ice making
About 2 hours each time
About 1 hour each time
(The ambient temperature is 20ºC and the
door is not opened or closed)
●
Ice storage capacity
• In the ordinary ice making mode, about 10 ice cubes can be made each time. The ice making time may be
extended due to different running states of the refrigerator.
The ice making time may be extended in the
following situations
• The freezing chamber is not fully cooled at the beginning of use.
Especially in the summer when the ambient temperature is higher,
the ice making time may even exceed one day.
• The refrigerator door is opened and closed frequently, or a large amount of
food is put in at one time.
• The room temperature is lower in the winter, or higher in the summer.
• The space around the refrigerator is too narrow.
Please refer to page 7.
Notes for ice making
The ice making continues until the detection rod touches the ice cube.
The following situation may prevent the ice from being made even though there is water in the water tank
The following situation may reduce the amount of ice made
Ice scoop Detection rod
Detection rod
Do not put anything
other than ice cubes
Flatten ice cubes
Please put the ice scoop
back in place after use.
Detection rod
Ice tray
Items other than ice cubes hit
the detection rod.
Items other than ice cubes cause
the rolling ice tray to be hit or stop
ice making.
Some ice cubes piling up in
some areas may hit the
detection rod too early, leading
to ice making being stopped
when ice making is insufficient.
• Do not put anything other than ice cubes in the ice storage box when not making ice.
Otherwise, when the ice making function is enabled again, items may hit the detection rod, resulting in a malfunction or failure to
start the ice-making.