Toshiba GR-RF646WE-PML(06), Руководство пользователя

Страница: 12 / 47

10
2.1 Placement
t Before initial start, keep the refrigerator still for half an hour
before connecting it to power supply.
t Before the refrigerator is moved, take all objects inside out,
fix the glass partitions, vegetable holder, freezing chamber
drawers and etc. with tape, and tighten the leveling feet;
close the doors and seal them with tape. During moving, the
appliance shall not be laid upside down or horizontally, or be
vibrated; the inclination during movement shall be no more
than 45°.
t
Before use, remove all packing materials, including bottom
cushions, foam pads and tapes inside of the refrigerator;
tear off the protective film on the doors and the refrigerator
body. Keep away from heat and avoid direct sunlight. Do not
place the freezer in moist or watery places to prevent rust or
reduction of insulating effect.
t Do not spray or wash the refrigerator; do not put the
refrigerator in moist places easy to be splashed with water
so as not to affect the electrical insulation properties of the
refrigerator.
t The refrigerator is placed in a well-ventilated indoor place; the
ground shall be flat, and sturdy (rotate left or right to adjust
the wheel for leveling if unstable).
t
The top space of the refrigerator shall be greater than 30cm,
and the refrigerator should be placed against a wall with a
free distance more than 10cm to facilitate heat dissipation.
Precautions before installation:
Before installation or adjusting of accessories, it shall be ensured
that the refrigerator is disconnected from power. Precautions shall
be taken to prevent fall of the handle from causing any personal
injury.
2. Proper use of refrigerators
30cm
10cm
10cm