17
Getting Started with Your gigabeat®
Charging the built-in battery/Connecting your computer and the
1
Start your computer.
2
Connect your computer and the gigabeat
®
using the provided
USB cable.
Connect to the USB port of your computer.
(Sample Illustration) Connecting the gigabeat
®
to the computer
❖
Make sure your computer is connected to the AC adaptor.
❖
Even if the gigabeat
®
power is not turned on, it will power
up automatically and the built-in battery will start to
charge.
“Connected” will appear on the gigabeat
®
screen as shown
below.
(Sample Image) gigabeat
®
connection
❖
If the gigabeat
®
is connected to a computer that does not
have Windows Media
®
Player 11 or 10 installed, the
“Found New Hardware Wizard” will start. If this wizard
starts, close it. Then install Windows Media
®
Player 11 or
10 following the steps in
❖
The “Found New Hardware Wizard” may still appear if
Windows Media
®
Player 10 is pre-installed. This is
because the necessary patch is not yet installed. Follow the
steps in
’ on page 15 to install the
patch.