Toshiba GD-1170 Скачать руководство пользователя страница 97

Страница: 97 / 182

If you want to send the relay destination transmission report, press
the [YES] button.

• If you press the [NO] button here, steps 10 and 11 are not necessary.
• For the relay destination transmission report, see (

P.124 “2.Automatically Printing Lists & Reports”).

Specify the remote Fax to receive the relay destination transmission
report from the address book or by a direct dialing (with the digital
keys).

• Only one remote Fax can receive this report.
• To change the selected remote Fax, delete it and specify a new one.

Confirm that the registered information is correct, and then press the
[ENTER] button.

• The mailbox has been set.

Press the [ALWAYS] button to always print out the received Fax, or
press the [ON ERROR] button to print it out only when the relay trans-
mission has failed.

Содержание GD-1170























































































































































































Результаты поиска

Содержание GD-1170

Отзывы:

Похожие инструкции для GD-1170

Бренды по названию

Популярные бренды

Toshiba GD-1170, Руководство оператора

Результаты поиска

Содержание GD-1170

Отзывы:

Похожие инструкции для GD-1170

Бренды по названию

Популярные бренды