Toshiba GA-1191 Скачать руководство пользователя | Manualshive

Страница: 4 / 156

background image

2 Software License Agreement

Software License Agreement

INSTALLING OR OTHERWISE USING THIS SOFTWARE PRODUCT CONSTITUTES YOUR
ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS (UNLESS A SEPARATE
LICENSE IS PROVIDED BY THE SUPPLIER OF APPLICABLE SOFTWARE IN WHICH CASE
SUCH SEPARATE LICENSE SHALL APPLY). IF YOU DO NOT ACCEPT THESE TERMS, YOU
MAY NOT INSTALL OR USE THIS SOFTWARE, AND YOU MUST PROMPTLY RETURN THE
SOFTWARE TO THE LOCATION WHERE YOU OBTAINED IT.

THE SOFTWARE INSTALLED ON THIS PRODUCT INCLUDES NUMEROUS INDIVIDUAL
SOFTWARE COMPONENTS, EACH HAVING ITS OWN APPLICABLE END USER LICENSE
AGREEMENT (“EULA”). INFORMATION RELATING TO THE EULAS MAY BE FOUND IN AN
ELECTRONIC FILE INCLUDED ON THE USER DOCUMENTATION CD-ROM INCLUDED
HEREWITH; HOWEVER, ALL SOFTWARE AND DOCUMENTATION DEVELOPED OR CRE-
ATED BY OR FOR TOSHIBA TEC CORPORATION (“TTEC”) ARE PROPRIETARY PROD-
UCTS OF TTEC AND ARE PROTECTED BY COPYRIGHT LAWS, INTERNATIONAL TREATY
PROVISIONS, AND OTHER APPLICABLE LAWS.

Grant of License

This is a legal agreement between you, the end-user (“You”), and TTEC and its suppliers. This
software, fonts (including their typefaces) and related documentation (“Software”) is licensed for
use with the system CPU on which it was installed (“System”) in accordance with the terms con-
tained in this Agreement. This Software is proprietary to TTEC and/or its suppliers.

TTEC and its suppliers disclaim responsibility for the installation and/or use of this Software, and
for the results obtained by using this Software. You may use one copy of the Software as
installed on a single System, and may not copy the Software for any reason except as neces-
sary to use the Software on a single System. Any copies of the Software shall be subject to the
conditions of this Agreement.

You may not, nor cause or permit any third party to, modify, adapt, merge, translate, reverse
compile, reverse assemble, or reverse engineer the Software. You may not use the Software,
except in accordance with this license. No title to the intellectual property in the Software is
transferred to you and full ownership is retained by TTEC or its suppliers. Source code of the
Software is not licensed to you. You will be held legally responsible for any copyright infringe-
ment, unauthorized transfer, reproduction or use of the Software or its documentation.

Term

This license is effective until terminated by TTEC or upon your failure to comply with any term of
this Agreement. Upon termination, you agree to destroy all copies of the Software and its docu-
mentation.

You may terminate this license at any time by destroying the Software and its documentation
and all copies.

«
...
2
3
4
5
6
...
»

Содержание GA-1191





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для GA-1191

Бренд: Pandigital Страницы: 2

Бренд: Chamjin I&C Страницы: 21

Бренд: Oki Страницы: 154

Бренд: Oki Страницы: 121

Бренд: Oki Страницы: 96

Бренд: Oki Страницы: 197

Saddle Finisher-AF2

Бренд: Canon Страницы: 244

Бренд: IDStation Страницы: 18

Бренд: ABLE Systems Страницы: 4

Бренд: Kyocera Страницы: 708

Bravo se Disc Publisher

Бренд: Primera Страницы: 58

Бренд: Oce Страницы: 62

Бренд: Oki Страницы: 220

Бренд: Xerox Страницы: 342

Бренд: AccuBANKER Страницы: 5

LabeLase 1000Exhaust

Бренд: InfoSight Страницы: 38

WorkForce 610 Series

Бренд: Epson Страницы: 52

Бренд: Epson Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды