3
Pole Installation
Installation Procedures
Chassis Installation
Position the pole and chassis sockets
in the direction shown, insert the pole
into the chassis socket and stabilize it;
Insert the bolt into the hole at the bottom of
the chassis and tighten the bolt to fix the
pole and chassis.
Chassis
pole
First, you need to align the hole of the
machine body with the pole, then rotate it
in and fix it to complete the installation of
the pole, be sure to rotate in place.
Rear Grill Installation
According to the direction shown, make the
rear grill of the fan upward in the direction of
the arrow, and make the round hole aligned
with the salient point on the front enclosure of
the motor;
After the motor head is hung on the rear grill,
rotate the plastic nut clockwise to lock the
rear grill.
Convex
cylinder
Round hole
Lock nut of grill
The arrow mark of the upper column tube
is to be within the identification range of
the lower column tube.
