6
INSTALLATION
Body Installation
Loosen Nut1 (counterclockwise) to remove it from Pole.
Attach Pole to Base by inserting the Convex into Concave.
Tighten Nut1 (clockwise) to fix Pole firmly on Base.
Loosen Knob.A (counterclockwise).
Tighten Knob.A (clockwise) firmly after inserting Pole.
Remove Spinner and Nut2 from Body.
Lock Rear Guard with Nut2 after attaching it to Body. (Refer to Fig. A)
Lock Blade with Spinner after attaching it to Body. (Refer to Fig. B)
Attach Front Guard to Rear Guard (Refer to Front Guard Installation)
Front Guard Installation
Align the hook of Front Guard
with Rear Guard as shown
below.
Press guards sequentially until
clipping.
Fix the clip using screw after
locking.
1
2
3
1
2
3
Guard Clip
Height Adjustment
Loosen Knob.B (counterclockwise).
Adjust the height by lifting up the body.
Tighten Knob.B (clockwise) to lock.
Pole
Knob.B
Base
Nut1
Body
Knob.A
Concave
Convex
<Bottom view>
Knob. B
INSTALLATION
Body Installation
