Toshiba E-STUDIO5506AC Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 331

Toshiba E-STUDIO5506AC Скачать руководство пользователя страница 52

e-STUDIO5506AC/6506AC/7506AC (Ver01)

© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved

2-6

2. Copier-specific Adjustments

2.1.2 To Adjust the Copy Image Quality in the Full Color Mode

* The setting value for the Full color mode shall be applied also when the original is judged as the full color

image in the Auto color mode.

* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed

below. You can use one procedure in conjunction with another. But if this changes the image quality more than
required or loses the effectiveness of the adjustment, restore the settings made in the previously used procedure
to the original ones. Then use other procedures.

* Both the service technician and the user can use procedures (1), (3) and (7).
* Only the service technician must use procedures (2), (4), (5), (6), (8) and (9).

(1)

Press [BASIC] on the Control Panel. Press [ ] to increase the copy density.

After increasing the copy density, copy and check the copy image quality.

With the copy density set to the maximum, if further image quality adjustments are still necessary, the
service technician must use the following procedures

(2)

Select [05 ADJUSTMENT MODE]. Increase the values for codes [7713 to 7726] to strengthen the copy
density of text.

• The code to be set varies depending on the original mode setting (Text/photo, Text, Printed image, Photo

(developing paper), Map, User custom, Red seal color) or the manual/automatic density setting. Select the
[05] code for the mode in which the image quality is to be changed, and set “128” or more for the setting
value.

Color

mode

Target

Original mode

[05]code

Recommended

value

Acceptable

value range

Default

Full color

Manual

density

Text/Photo

05-7713

Set a value larger

than 128.

0 to 255

128

Text

05-7714

Printed image

05-7715

Photo

05-7716

Map

05-7717

User custom

05-7718

Red seal color

05-7719

Automatic

density

Text/Photo

05-7720

Set a value larger

than 128.

0 to 255

128

Text

05-7721

Printed image

05-7722

Photo

05-7723

Map

05-7724

User custom

05-7725

Red seal color

05-7726

* When the manual setting value of the manual density is altered while it is set in the BASIC menu on the

control panel, the density in the steps in all the indicators including the center value is also changed. One
step in the indicator corresponds to “20” of the setting value in [05] code.

«
...
50
51
52
53
54
...
»

Содержание E-STUDIO5506AC












































































































































































































































































































































Отзывы:

Нет отзывов