Toshiba E-STUDIO5506AC Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 331

Toshiba E-STUDIO5506AC Скачать руководство пользователя страница 100

e-STUDIO5506AC/6506AC/7506AC (Ver01)

© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved

2-54

2. Copier-specific Adjustments

2.11.2 To Adjust the Copy Image Quality of a Colored Logo

* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed

below. You can use one procedure in conjunction with another. But if this changes the image quality more than
required or loses the effectiveness of the adjustment, restore the settings made in the previously used procedure
to the original ones. Then use other procedures.

* Both the service technician and the user can use procedures (1) to (3).
* Only the service technician must use procedure (4).

(1)

Press [BASIC] on the Control Panel. Press [ ] to increase the copy density.

After increasing the copy density, copy and check the copy image quality.

With the copy density set to the maximum, if further image quality adjustments are still necessary, use the
next procedure.

(2) Perform color balance adjustment or RGB adjustment to adjust the tint of the colors in general.

•

Use steps (a) through (d) to perform the adjustment.

(a) Press [IMAGE] on the Control Panel.
(b) Press [COLOR BALANCE] to adjust the color balance by changing the amount of toner (C, M, Y

and K) or [RGB ADJUSTMENT] to adjust the color balance by changing the intensity of R, G and B.

(c) Press [+] to enhance the tint of the color or [-] to decrease it.

* After selecting the color balance by changing the amount of toner (C, M, Y and K), press

[DETAIL]. The tint of the color can be adjusted according to density area (low-, medium- or high-
density area).

(d) Press [ENTER].

After adjusting the tint of the colors, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

(3) Press [BASIC] on the Control Panel. Select “TEXT” from among the original mode options.

* To have “TEXT” selected from among the original mode options by default, refer to "2.18 To Program

Frequently Used Copy Settings (To Use Custom Mode)".

After selecting the Text or Map mode, copy and check the copy image quality.

If further image quality adjustments are still necessary, the service technician must use the next procedure.

«
...
98
99
100
101
102
...
»

Содержание E-STUDIO5506AC












































































































































































































































































































































Отзывы:

Нет отзывов