Toshiba e-STUDIO163, Руководство по обслуживанию

Страница: 34 / 236

e-STUDIO163/203 © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 16
2.4.2 Construction of boards
[ 1 ] Construction diagram of boards
This system consists of the following including the MAIN board as a main board.
Fig. 2-11
[ 2 ] Function of each board
• MAIN board:
This is the board taking the leading part in all systems. It consists of the SoC, ASIC, memory
(SDRAM, Flash ROM), etc. In the SoC (System control), which is a core of this MAIN board, the
functions of the CPU, image processing, page memory control, CODEC, external interface (USB)
control, etc. are embedded and performed by one chip.
Based on the data input from the control panel, the SoC controls each system, such as the ASIC,
each memory, CIS unit and laser optical unit, and thus permitting the scanning of originals and the
printing of data.
• SRAM board:
This is the board on which the SRAM for storing the user's setting information and counter value and
its backup function are mounted. When the MAIN board is replaced, attaching this board to the new
MAIN board can assume the data of the previous equipment.
• LPNL board:
This is the board on which each button switch and LED on the control panel are mounted.
• CTRG board:
This is the board on which the IC chip for storing information about the toner cartridge (number of
prints, identification data, etc.) is mounted.
• CTIF board:
This is the interface board with the CTRG board in the toner cartridge. Information written in the IC
chip on the CTRG board is read into the SoC on the MAIN board through this board.
: DC power supply line
: AC power supply line
: Signal line
AC input
Main switch Cover opening/closing
interlock switches
MAIN
PS-ACC
HVPS
LVPS
FUS
CTRG CTIF
Toner cartridge
LPNL
Control panel
SRAM
LDR
SNS
Laser optical unit
CIS
Scanner unit
07/02