Toshiba e-STUDIO FASTstart 200L Скачать руководство пользователя страница 289

Страница: 289 / 316

287

Cleaning the Charger

If the inside of the charger wire become dirty, the dirt may appear on the copy.

* Before start cleaning, BE SURE TO TURN OFF THE POWER, then open the front cover.

To turn the power OFF, see "Turning off the Power (Shutting down)"

Page 31.

Open the front cover.

Clean the charger.

- Hold the cleaning knob, pull it out slowly and fully to the front and

then push it back to the inside carefully and completely. Repeat
this 2 or 3 times.

Make sure that the charger knob is pushed in fully inside.

Close the front cover.

Содержание e-STUDIO FASTstart 200L





























































































































































































































































































































Результаты поиска

Содержание e-STUDIO FASTstart 200L

Отзывы:

Toshiba e-STUDIO FASTstart 200L, Руководство оператора, Страница: 289 / 316

Результаты поиска

Содержание e-STUDIO FASTstart 200L

Отзывы: