Toshiba e-STUDIO 257 Скачать руководство пользователя страница 148

Страница: 148 / 172

6 TEMPLATES

146 Deleting Groups or Templates

Deleting Groups or Templates

You can delete private groups or templates no longer needed. If a private group is deleted, all the templates in

the private group are also deleted.

The public template group cannot be deleted.



Deleting private groups

In the template menu, select the desired private group.

1) Press the [REGISTRATION] tab.

2) Select the desired group by pressing its button or keying in its group number (3 digits).

3) Press [DELETE].

To switch the menu

Press

Key in the password for the selected group. (If no password is set, go to step 3.)

1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital

keys on the control panel.

2) Press [OK].

Press [DELETE].

The private group is now deleted.

Содержание e-STUDIO 257











































































































































































Результаты поиска

Содержание e-STUDIO 257

Отзывы:

Toshiba e-STUDIO 257, Руководство по копированию, Страница: 148 / 172

Результаты поиска

Содержание e-STUDIO 257

Отзывы: