Toshiba e-STUDIO 257 Скачать руководство пользователя страница 144

Страница: 144 / 172

6 TEMPLATES

142 Recalling Templates

Press the button for the desired template.

To switch the menu

Press

Templates with the automatic start function enabled can be identified with . If this mark is displayed,

you can press it to immediately start the operation of the functions set in the template.

Key in the password for the selected template. (If no password is set, go to step 8.)

1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital

keys on the control panel.

2) Press [OK].

Confirm that “Updated the template setting.” is displayed on the touch panel.

The message is displayed for approx. 3 seconds.

Select other copy modes as required, and then press the [START] button on the control
panel.

Содержание e-STUDIO 257











































































































































































Результаты поиска

Содержание e-STUDIO 257

Отзывы:

Toshiba e-STUDIO 257, Руководство по копированию, Страница: 144 / 172

Результаты поиска

Содержание e-STUDIO 257

Отзывы: