Toshiba e-studio 2309a, Руководство по установке программного обеспечения

Страница: 12 / 48

1 BEFORE INSTALLATION
10 Before Installing the Software in UNIX/Linux
Before Installing the Software in UNIX/Linux
Refer to following pages to install the software and configure the printer in UNIX/Linux:
 P.10 “About CUPS”
 P.10 “System requirements”
 P.11 “Connection Environment”
 P.36 “Configuring the Printer Using CUPS”

About CUPS
When you configure the printer in UNIX/Linux using CUPS, you can use LPR printing or IPP printing. This
guide describes the behavior, options, and installation method of the CUPS printer driver for the equipment.
The behavior of the printer driver presented in this manual is consistent with CUPS v1.2.4. The driver may
appear and/or operate slightly differently in different versions. In the CUPS environment, you use a PostScript
Printer Description (PPD) file, not a printer driver to configure the printing. The PPD file is included in this
package.

System requirements
Development Environment
The supported UNIX/Linux environment is as follows.
OS:
Redhat Enterprise 5.10.x, 6.5.x
Fedora Ver.19
Open SuSE Ver.11.3
Bharat Operating System 5.x
CUPS:
1.2.4
Implementation Method
This driver consists of a PPD file that works in conjunction with an interface like XPP, KPrinter, etc. It can also
be used on OSX in the same way that it is used on Linux, but this is not recommended.