Toshiba e-studio 223 Скачать руководство пользователя страница 48

Страница: 48 / 114

2 HOW TO MAKE COPIES

46 Placing Originals

Placing booklet-type originals such as books or catalogues

Place a book-type original on the original glass.

Do not place heavy objects (4 kg or more) and do not press on it with force.

Breaking the glass could injure you.

Raise the Platen Cover (optional) or the Automatic Document
Feeder (optional).

Open the desired page of the original and place it face down.
Align it against the left rear corner of the glass.

Lower the Platen Cover (optional) or the Automatic Document
Feeder (optional) carefully.

Do not try to lower the Platen Cover (optional) or the Automatic Document Feeder
(optional) forcibly when the original is very thick. There will be no problem in copying
even if they are not fully lowered.

Do not look fully at the original glass since intensive light may leak out during copy-
ing.

Содержание e-studio 223



















































































































Результаты поиска

Содержание e-studio 223

Отзывы:

Toshiba e-studio 223, Руководство оператора по функциям копирования, Страница: 48 / 114

Результаты поиска

Содержание e-studio 223

Отзывы: