manualshive.com logo in svg

Toshiba e-studio 223, Руководство оператора по функциям копирования, Страница: 47 / 114

Поделиться
Скачать
Toshiba e-studio 223 Скачать руководство пользователя страница 47

Placing Originals    45

Placing originals on the original glass

Plain paper or some special media types which are not acceptable for the Automatic Document 
Feeder (optional), such as overhead transparencies or tracing paper, should be placed on the 
original glass.

Do not place heavy objects (4 kg or more) and do not press on it with force.

Breaking the glass could injure you.

1

Raise the Platen Cover (optional) or the Automatic Document 
Feeder (optional).

2

Place the original face down on the original glass and align it 
against the left rear corner of the glass.

When copying highly transparent originals

When copying highly transparent originals such as overhead transparencies or tracing 
paper, place a blank sheet of paper (A), the same size as the original or larger, over the 
original (B).

3

Lower the Platen Cover (optional) or the Automatic Document 
Feeder (optional) carefully.

B

A

Содержание e-studio 223



















































































































Отзывы:

Нет отзывов