32
Using the dynadock™ and Adjusting Settings
Using standby/sleep/hibernation modes with the dynadock™
Using standby/sleep/hibernation modes with the
dynadock™
When your docked computer enters standby/sleep/hibernation
mode, devices connected to the dynadock™ will not function until
the computer returns to an active state.
In addition, please keep in mind the following important
information regarding the affect of standby/sleep/hibernation mode
on external displays connected to the dynadock™:
❖
The external display connected to the dynadock™ will go
blank if the computer enters standby/sleep/hibernation mode.
❖
In Mirror mode, the external display retains the settings it had
previously when the computer resumes from
standby/sleep/hibernation.
❖
In Extended mode, windows that were previously on the
external display may appear on the computer's built-in display
when the computer resumes from standby/sleep/hibernation.
You may need to reposition the windows by dragging them to
the external desktop again.
❖
If the external display is in Extended mode and the computer
requires you to log in after resuming from
standby/sleep/hibernation, the login screen may appear on the
primary computer display, not the external display. This is
consistent with Windows
®
operating system standards.
