Toshiba Dynabook Vx/4 Скачать руководство пользователя страница 138

Страница: 138 / 284

3 Diagnostic Programs

3.11Error Codes and Description

32bits Video Mode Test
Error

As above.

31xx

Audio

01 Audio Play Fail

Cannot play music.

Check the Audio connection,
replace the external fixture, and
repeat the test.

02 Record Fail

Cannot record.

As above.

11xx

LPT

01 Data Register Error

The data register can not perform
normally.

Check the external fixture and
BIOS setup, and repeat the test.

02 Control Register Error

The control register can not
perform normally.

As above.

Does not Support ECP
Mode(Ver3.20)

LPT does not support ECP mode.

Check the BIOS setup, and repeat
the test.

04 FIFO Test Error

LPT cannot perform normally
under FIF0 TEST mode (ECP
internal mode).

As above.

05 IRQ Active Error

1.LPT IRQ cannot be activated.
2. The external fixture does not
match with the chosen version.

Check the external fixture and
BIOS setup, and repeat the test.

06 No Fixture On The Port No external fixtures on LPT port. As above.

CTR/STR Connection
Error

1. There is OC (Open Circuit) or
SC (Short Circuit) on the LPT
port CTR/STR.2. The external
fixture does not match with the
chosen version.

Check the external fixture and the
port pins, and repeat the test.

DTR/STR Connection
Error

As above.

11 Toshiba Fixture Error

As above.

08xx

LAN

Card

PCI bus Error during
device ID test

Don’t Scan PCI

device

Don’t support PCI BIOS

PCI Ethernet card not
present during device ID
test

Don’t find Net card

Please insert Net cad

Intel PCI Ethernet card
not present during MAC
test

Don’t found Net Card, This Card
can’t be Read MAC by this
method

Please update net card or use
other method

09xx

Keyboard

Keyboard Map & Stroke
Test Fail

Keyboard Map & Stroke Test
fails.

Check the KBD connection and
repeat the test.

Clock Line Test Fail

Clock Line Test fails.

As above.

Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual

Содержание Dynabook Vx/4





























































































































































































































































































Результаты поиска

Содержание Dynabook Vx/4

Отзывы:

Похожие инструкции для Dynabook Vx/4

Бренды по названию

Популярные бренды

Toshiba Dynabook Vx/4, Руководство по обслуживанию

Результаты поиска

Содержание Dynabook Vx/4

Отзывы:

Похожие инструкции для Dynabook Vx/4

Бренды по названию

Популярные бренды