Toshiba DST-3100, Руководство пользователя

Страница: 33 / 96

33
Installation
Use the Input Configuration screen to configure the source type that is connected to the ANT1 and ANT2 jacks.
Local Antenna/Cable Only
Configuring your receiver to work with an Antenna and/or Cable service.
Press
or to navigate to the appropriate
fields.
Press
or to select the type of inputs you
connected to the DST-3100.
Press
or to navigate to the Save button and
press SELECT.
1
2
3
Input Configuration Screen
Press
or
to highlight Scan and then press
SELECT.
The receiver will scan for available channels
from the input source(s) that you configured in
the Input Configuration screen.
When the scan is complete, the screen will list
the channels and which antenna input they are
coming from (ANT1 or ANT2).
4
3
Notes
• If you have not configured any inputs, the message below
will be displayed. To configure the inputs, select Inputs on
the
Terrestrial Channels screen.
1
Now that you have configured the inputs, the
Terrestrial Channels screen allows you to select the available channels for
your input source.
Press or to highlight the desired channel
boxes (on the left side of the screen). Press
SELECT to add the highlighted channel. A blue
box with a checkmark indicates the channel has
been added.
To remove a selected channel, highlight the
desired blue box and press SELECT. The
checkmark will be removed and the box will be
gray.
After you have selected all desired channels,
press or to highlight Save and then press
SELECT.
Press to highlight the channel list if you need
to manually add or delete channels
2
Terrestrial Channels Screen