Toshiba D-VR7KC, Руководство по обслуживанию

Страница: 102 / 115

2-4-1 MK14NDA_T
DISASSEMBLY/ASSEMBLY PROCEDURES
OF DECK MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer
to CABINET DISASSEMBLY INSTRUCTIONS of Main Section.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject
mode; see the positions of [41] and [42] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in
reverse order.
Step
/Loc.
No.
Starting
No.
Part
Removal Installation
Fig. No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Adjustment
Condition
[1] [1] Guide Holder A T DM3 2(S-1)
[2] [1] Cassette Holder Assembly T DM4
[3] [2] Slider (SP) T DM5 (S-1A), *(L-1)
[4] [2] Slider (TU) T DM5 *(L-2)
[5] [4] Lock Lever T DM5 *(L-3), *(P-1)
[6] [2] Cassette Plate T DM5
[7] [7] Cylinder Assembly T DM1, DM6 Desolder, 3(S-2)
[8] [8] Loading Motor Assembly T DM1, DM7
Desolder, LDG Belt,
2(S-3)
[9] [9] ACE Head Assembly T DM1, DM7 (S-4)
[10] [2] Tape Guide Arm Assembly T DM1, DM8-1 *(P-2)
[11] [10] C Door Opener T DM1, DM8-1 (S-4A), *(L-4)
[12] [11] Pinch Arm (B) T
DM1, DM8-1,
DM8-2
*(P-3)
[13] [12] Pinch Arm (A) Assembly T
DM1, DM8-1,
DM8-2
[14] [14] FE Head T DM1, DM9 (S-5)
[15] [15] Prism T DM1, DM9 (S-6)
[16] [2],[15] Sensor Gear T DM1, DM9
[17] [2] Slider Shaft T DM10 *(L-5)
[18] [17] C Drive Lever (SP) T DM10
[19] [17] C Drive Lever (TU) T DM10 (S-7), *(P-4)
[20]
[7],[8],
[10]
Capstan Motor B DM2, DM11 3(S-8), Cap Belt
[21] [21] Clutch Assembly B DM2, DM12 (C-1)
[22] [22] Cam Holder Assembly B DM2, DM12 *(L-6)
[23] [23] Cam Gear (B) B DM2, DM12 (C-2), *(P-5)
[24] [24] Mode Gear B DM2, DM13-1 (C-3)
[25a] [1], [25a] Holder ML SHARP HI-Speed B DM2, DM13-1 (S-8a)
[25]
[21],
[23], [24] Mode Lever
B
DM2, DM13-1,
DM13-2
(C-4), *(L-8)
[26] [22] Worm Holder B DM2, DM13-1 (S-9), *(L-9), *(L-10)
[27] [26] Pulley Assembly B DM2, DM13-1
[28] [25], [26] Cam Gear (A) B
DM2, DM13-1,
DM13-2
[29] [25] Idler Gear B DM1, DM14
[30] [29] Idler Arm B DM1, DM14 *(L-11)