background image

8

Notes on copyright

It is prohibited by law to copy, broadcast, show,
broadcast on cable, play in public, and rent
copyrighted material without permission.
It is permissible to record television programmes, film,
video tapes and other material only in the event that
third party copyrights and other rights are not violated.
Some DVD video discs are copy protected, and any
recordings made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
This unit incorporates CPRM (Content Protection for
Recordable Media) technology for copyright protection
in recording devices, authorized by DVD forum.
Recording and copying on this recorder depend on the
contents as described next page.

Precautions (Continued)

Notes on moisture condensation

Moisture condensation damages the unit. Please
read the following carefully.

Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the unit.

Moisture condensation occurs during the
following cases.

When you bring the unit directly from a cold place to a
warm place.
When you use the unit in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
In summer, when you use the unit in a hot and humid
place just after you move the unit from an air
conditioned room.
When you use the unit in a humid place.

Do not use the unit when moisture condensation
may occur in the situations above.

If you use the unit in such a situation, it may damage
discs and internal parts. Connect the power cord of
the unit to the wall outlet, turn on the unit, remove the
disc, and leave it for two or three hours. After two or
three hours, the unit will have warmed up and
evaporated any moisture. Keep the unit connected to
the wall outlet and moisture condensation will seldom
occur.

Introduction

Exam

ple of moisture

condensation!

Optical pick-up 

lens

It’s too

warm!

Wait!

Wall outlet

02_D-R150SB(E)_inst02-12

05.7.13, 0:23 AM

8

Содержание D-R150SB

















































Отзывы: