Toshiba CIEMAC-DS, Инструкция по эксплуатации

Страница: 24 / 49

2. Engineering
11
2.2 Engineering Operations
(1) Engineering of DPCS
Figure 2.2 indicates the specific engineering operations to connect DPCS.
c
Use the DPCS Builder to build the control card functions for DPCS and create files to be
downloaded to the control cards. These files are temporarily written to a floppy disk. If you upload
the information of the control cards currently operating, refer to "2.3 Cautions on Replacement of
TOSDIC".
d
Use the PCS Engineering Tool to register the DPCS Station Type and the control card configuration
within DPCS, as well as the DPCS tag name, I/O points, and parameters. If the DPCS-to-DPCS
transmission is used, send/receive data are registered.
e
Use the PCS tool to read the floppy disk (downloaded files) created by the DPCS Builder, and
download the files to the control cards of DPCS.
f
Use the OIS/SVR Engineering Tool to register the Station Type of DPCS.
DOS/V Version
Ethernet Control LAN
OIS/SVR Tool
(DPCS-
PCS-DS
PCS Tool
(DPCS-
DPCS
DPCS
Builder
F
DPCS Device Registration
Construction of DPCS
Internal Logic
Registration of DPCS
Devices and Tags
DL/UL Operations
Figure 2.2 Engineering Operation Environment
(2) Engineering of OIS/SVR
You need to create all engineering for OIS and SVR. You cannot use the information created by POC. If
there exist any BASIC programs, you also need to create them.