Toshiba BMS-IFBN640TLE, Руководство по установке

Страница: 8 / 14

BN interface Installation Manual
8
-EN
2
Power and signal line connections
 Cables
Use the following cable for signal line connections. (Procured locally)
Ethernet
®
is a registered trademark of Xerox Co., Ltd.
 Cable Connections
Connect the cables to the specified connectors.
Length of stripped TCC-LINK communication cable
CAUTION
The TCC-LINK communication cable have no polarity.
* Secure the TCC-LINK communication cable and power cable to the switchboard etc. using the supplied cable tie to
ensure that no excess load is placed on the power cable connection and TCC-LINK communication cable connection.
No. Line Description
1 For TCC-LINK
Type 2-core shielded wires
Wire size 1.25 mm
2
, 1000 m max.
total length
including air conditioner wiring length
Length 2.00 mm
2
, 2000 m max.
2 For Ethernet
®
Type
LAN cable (higher than Category 5, UTP)
The appropriate use of straight cable/cross cable should be done depending on your
system used
Length 100 m max.
50 10
Connect the supplied pin terminal to the TCC-LINK
communication cable as necessary.
7&&/,1. 9'&,1 (WKHUQHW/$1
Connection of TCC-
LINK Communication
Cables
Connect the
supplied power
adapter
Connect the LAN
cable
The TCC-LINK communication cable must
be earthed on the air conditioner.
Do not connect the shield wire to the
connector. It should be open and
insulated.
Air conditioner