![background image](http://html.mh-extra.com/html/toshiba/bdx1200ke/bdx1200ke_owners-manual_424395054.webp)
10
English
4
Preparation
Always follow the instructions in this chapter
in sequence.
Note:
-‐ Use of controls or adjustments or
performance of procedures other than herein
ŵĂLJƌĞƐƵůƚŝŶŚĂnjĂƌĚŽƵƐƌĂĚŝĂƟŽŶĞdžƉŽƐƵƌĞŽƌ
ŽƚŚĞƌƵŶƐĂĨĞŽƉĞƌĂƟŽŶ͘
Prepare the remote control
1. Open the battery compartment.
2. Insert two R03 batteries with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
-‐ If you are not going to use the remote control
ĨŽƌĂůŽŶŐƟŵĞ͕ƌĞŵŽǀĞƚŚĞďĂƩĞƌŝĞƐ͘
ͲŽŶŽƚƵƐĞŽůĚĂŶĚŶĞǁŽƌĚŝīĞƌĞŶƚƚLJƉĞƐŽĨ
ďĂƩĞƌŝĞƐŝŶĐŽŵďŝŶĂƟŽŶ͘
Ͳ ZŝƐŬ ŽĨ ĞdžƉůŽƐŝŽŶ͊ <ĞĞƉ ďĂƩĞƌŝĞƐ ĂǁĂLJ ĨƌŽŵ
ŚĞĂƚ͕ƐƵŶƐŚŝŶĞŽƌĮƌĞ͘EĞǀĞƌĚŝƐĐĂƌĚďĂƩĞƌŝĞƐŝŶ
ĮƌĞ͘
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
7 m 10 m
7 m
Setting up the player
Find the correct viewing input
1. Press
to turn on this product.
2. Turn on the TV and switch to the correct
video-in input (refer to the TV user manual
on how to select the correct input).
Initial Setting
:KHQ\RXWXUQRQWKLVXQLWIRUWKH¿UVWWLPH
you need to follow these steps.
1. A welcome page will be displayed when
this product is powered on.
2. Press OK to enter language setting.
3. Select your desired language,
resolution and aspect ratio using
S
/
T
, then
press OK.
4. Press SETUP to exit the Setup menu.
Use the SETUP menu
1.Press SETUP
to display the Setup menu
when the Blu-ray Disc
TM
Player is playing or
no disc. And press SETUP
to exit the Setup
menu.
Tip:
ͲtŚĞŶƉůĂLJŝŶŐŚŝŐŚͲĚĞĮŶŝƟŽŶƐŽƵƌĐĞƐ
,
you must press
STOP
ďƵƩŽŶƚŽĞŶƚĞƌ
SETUP
interface.
Select menu display language
1
.
Press SETUP
, [General Setting]
menu
is displayed.
2. Select
[Language],
then press
X
.
3. Select
[OSD],
then press
X
.
- The language options may vary for
different regions.
4. Press
S
/
T
to select a language, then
press
OK.
Note:
-‐ If this disc player is connected to a HDMI CEC
ĐŽŵƉůŝĂŶƚds͕ƐŬŝƉƚŚŝƐƐĞƚƚŝŶŐ͘/ƚƐǁŝƚĐŚĞƐ
automatically to the same OSD menu language
as per your TV setting.