Toshiba Adjustable Speed Drive H7 Series, Инструкции по эксплуатации

Страница: 57 / 230

50 H7 ASD Operation Manual
Table 5. Output terminals AM, FM, FP, and Analog 1&2 assignment selections.
Function
0 Output Frequency (FM and FP default setting)
1 Frequency Reference
2 Output Current (AM default setting)
3 DC Bus Voltage
4
Output Voltage (
Analog 1 default setting)
5
Post-compensation Frequency (
Analog 2 default setting)
6 Speed Feedback (realtime)
7 Speed Feedback (1 sec filter)
8 Torque
9 Torque Command
10 Internal Torque Base
11 Torque Current
12 Excitation Current
13 PID Feedback Value
14 Motor Overload Ratio
15 ASD Overload Ratio
16 PBR Overload Ratio
17 PBR Load Ratio
18 Input Power
19 Output Power
20 Peak Output Current
21 Peak DC Bus Voltage
22 PG Counter
23 Position Pulse
24 RR Input
25 VI/II Input
26 RX Input
27 RX2 Input
28 FM Output (used for factory testing only)
29 AM Output (used for factory testing only)
30 Meter Adjust Value
31 Analog Output
32 Load Torque
www
. ElectricalPartManuals
. com