– 14 –
PARTS REPLACEMENT IN LIGHT ENGINE
4 screws
FAN Hood
4 pins
Ballast
H
ood
1.
Replacement of Lamp FAN (SK01)
1-1. Replace the FAN for cooling Lamp (SK01), remove the
4 screws on the FAN Hood, and remove the 4 pins by
pressing toward allows using a screwdriver, and the
remove the FAN for cooling Lamp.
NOTE:
Reinstalling the FAN for cooling Lamp, attach the 4 pins
by using removed them after replace the FAN.
2.
Replacement of Ballast FAN (SK03)
2-1. Replace the FAN for cooling Ballast Power Unit (SK03),
remove the Ballast Hood, and remove the 2 screws on the
Ballast Case Cover.
2-2. Remove the 4 pins by pressing toward inside of the FAN
using a screwdriver, and then remove the 4 pins toward
allows as figure.
Remove the FAN for cooling Ballast Power Unit.
NOTE:
Reinstalling the FAN for cooling Ballast Power Unit,
attach the 4 pins by using removed them after replacing
the FAN.
2 screws
Ballast Case Cover
