background image

English

   - 2 -

Environmental Information

This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps:

If you set the 

Energy Saving

 to 

Minimum

 or 

Medium

 the TV will reduce the energy consumption accordingly. 

If you like to set the 

OLED Luminance

 to a fixed value set as 

Custom

 and adjust the 

OLED Luminance

 

(located under the 

Energy Saving

 setting) manually using Left or Right buttons on the remote. Set as 

Off

 to 

turn this setting off.

Note: 

Available 

Energy Saving

 options may differ depending on the selected 

Mode

 in the 

Settings>Picture

 menu.

The 

Energy Saving 

settings can be found in the 

Settings>Picture

 menu. Note that some picture settings will 

be unavailable to be changed.
If pressed Right butto

n o

r Left butto

n consecutively, “

S

creen will be off in 15 seconds.

” message will be 

displayed on the screen. Select 

Proceed

 and press 

OK

 to turn the screen off immediately. If you don’t press 

any button, the screen will be off in 15 seconds. Press any button on the remote or on the TV to turn the screen 

on again. 

Note: Screen Off 

option is not available if the Mode is set to

 Game

.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce 

energy consumption.

Disposal Information

The following information is only for EU-member states:

Disposal of products

The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately

from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be 

separated at the recycling centres.

The black bar indicates that the product was placed on the market after August 13, 2005.

By participating in separate collection of products and batteries, you will help to assure the proper disposal of 

products and batteries and thus help to prevent potential negative consequences for the environment and human 

health.

For more detailed information about the collection and recycling programmes available in your country, please 

contact your local city office or the shop where you purchased the product.

Disposal of batteries and/or accumulators

 

The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and 

disposed of separately from household waste.

If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium 

(Cd) defined in the 

European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or 

cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.

By participating in separate collection of batteries, you will help to assure the proper disposal of products and 

batteries and thus help to prevent potential negative consequences for the environment and human health. For 

more detailed information about the coIIection and recycling programmes available in your country, please contact 

your local city office or the shop where you purchased the product.

• 

Содержание 55 X98 Series





































Отзывы: