On this television the red, green and blue images
are projected separately onto the screen. They
converge to form a full colour picture and when they
converge correctly you will see a clear screen. It is
especially apparent when viewing cartoons.
The colour convergence is factory set and should need
little or no adjustment. However, convergence may drift
over time or if you move the TV.
To realign the colour…
From the
Feature menu
select
Convergence
.
To adjust the colours, press the
RED or BLUE button to select
RED or BLUE and then the
S
or
R
and
P
or
Q
buttons
to adjust until the white cross
has no 'shadow'.
Press the
EXIT
button to go back to the TV screen
to check the picture. If more adjustment is needed,
simply repeat
steps 1
and
2
above.
If the edges of the screen are not right, select the
numbers in turn
e.g.
number 1 to select the top
left hand corner of the screen, and repeat
step 2
.
Press
EXIT
to finish.
There is little or no colour…
When using an external source, for instance, a
poor quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The television
is factory set to
AUTO
in the
Set up
menu to
automatically display the best colour system.
To check that you have the best colour…
From the
Set up
menu select
Colour
.
With the
S
or
R
button, choose between
AUTO,
PAL
,
SECAM, NTSC 4. 43
or
3. 58
.
This is sometimes due to condensation if the
room temperature rises rapidly or if the TV is
moved from a cold room to a warm room. If you leave
the set turned on for a while this should improve images.
A
Why are there distorted images/faded colours?
29
A
FOR YOUR GUIDANCE
Q
uestions
and
A
nswers
…
If you experience what seem like problems operating your TV, we recommend you read through these
simple checks.
A
29
1
2
3
4
1
2
red
blue : to exit
1
2
3
7
8
9
4
6
f
f
f
f
P
P
Q
Why is the screen fuzzy, and the colours not clear?
Q
There IS a picture, but why is there little or no colour?
Check that the mains switch is on and check all the
connections. Press the Standby button
i
on the
remote control to make sure that the TV is not in Standby
mode.
A
Q
Q
Why is there no sound or picture?
EXIT
…
For quick
reference to topics,
see the INDEX at the
back of this manual.
☛
EXIT
: To exit
Set up
EXIT
: To exit
Language
ENGLISH
Colour
AUTO
Auto tuning
Manual tuning
Programme sorting
Teletext
NexTView set up
Yes, interference or a weak signal. Try a different TV
station.
Manual fine tuning
may help.
A
Can anything else cause a poor picture?
Q
Feature menu
AV connection
Horizontal position
Surround set up
Panel lock
OFF
Blue screen
ON
Convergence
