Toshiba 47LX196, Руководство по эксплуатации

Страница: 70 / 90

70
LX196 (E/F) Web 213:276
Chapter 7: Using the THINC ™ home network feature
“TESTING E-MAIL” ERROR CODES
Code Description Solutions
–1 The TV was able to connect to the
e-mail server(s) but could not log on.
•
If you receive the message “Error Sending Mail (–1),” the TV may not
have received the test e-mail. Send another test e-mail to the TV using
the “HELP request e-mail” format (
-
page 75).
•
Make sure the TV Guide On Screen
™
system was set up properly. See
“IMPORTANT NOTE” on page 68.
•
Make sure you entered the correct information for the following fields
in the TV’s “
E-mail Scheduling Setup
” window (confirm this
information with your ISP):
–“
Incoming Mail Server” and “ Outgoing Mail Server ” names (or
IP addresses).
–“ Account ” (user name) and “ Password ” for the TV’s e-mail
account.
–“
E-mail Address
” for the TV.
•
Check with your ISP to make sure your TV’s e-mail account has been
activated.
•
Check with your ISP to make sure their servers support POP3 and SMTP
protocols without secure password authentication or secure connections.
28 The TV could not resolve the e-mail
server name(s)/address(es).
•
Make sure you entered the correct information for the following fields
in the TV’s “
E-mail Scheduling Setup ” window (confirm this
information with your ISP):
–“
Incoming Mail Server ” and “ Outgoing Mail Server ” names (or
IP addresses).
–“ IP ,” “ Netmask ,” “ Gateway ,” and “ DNS ” settings (applicable if
you manually set up the network address).
•
Make sure all cables are connected properly and securely.
•
Check your router hardware/settings to make sure your Internet service
is currently available (especially if the e-mail test takes several minutes
to complete).
35 The e-mail server name(s)/address(es)
were resolved correctly, but TV could
not log on to the servers.
•
Make sure you entered the correct information for the following fields
in the TV’s “
E-mail Scheduling Setup ”:
––Username and password.
–“
Incoming Mail Server ” and “ Outgoing Mail Server ” names (or
IP addresses).
–“
IP
,” “
Netmask
,” “
Gateway
,” and “
DNS
” settings (applicable if
you manually set up the network address).
•
Make sure all cables are connected properly and securely.
•
Check your router hardware/settings to make sure your Internet service
is currently available.
LX196_EN.book Page 70 Friday, June 23, 2006 5:06 PM