40
Using the TV’s features (General)
2
To view these pages, use the coloured prompt buttons,
e�g� press the Green button to view page 200�
3
If you want to change the stored pages, press the
coloured button for the colour you want to change,
e�g� press the Green button and enter the 3-digit
number�
100
TEXT M00
14:58:59
100
250
300
400
This number will change in the top left of the screen
and in the coloured highlight�
4
Press to store your choice�
5
You may view other pages by simply entering the
3-digit page number – but NEVER press or you
will lose the favourite already stored�
Teletext buttons on the remote control
Below is an introduction to the teletext buttons on your
remote control and their functions�
k
To display the index/initial page:
In Auto-mode
Press
k
to access the index page� The one displayed is
dependent on the broadcaster�
In LIST-mode
Press
k
to return to the 100 page or initial page�
A
To reveal concealed text:
Some pages cover topics such as quizzes and jokes. To
discover the solutions, press
A
�
B
To hold a specific page:
At times it is convenient to hold a page of text� Press
B
and
B
will appear in the top left of the screen� The page
will be held on screen until the button is pressed again�
C
To enlarge the teletext display size:
Press
C
once to enlarge the top half of the page, and
press again to enlarge the bottom half of the page� Press
again to revert to the normal size.
D
To select a page while viewing normal
picture:
When in teletext mode, if a page selection is made and
then
D
is pressed, normal picture will be displayed�
The TV will indicate when the page is present by
displaying the title bar of the text page at the top of the
screen� Press
i
to view the page�
Note:
It will not be possible to change TV channels while
in Teletext mode. You will have to cancel Teletext
first by pressing
i
to return to normal TV picture.
To select the time display
- analogue -
:
If you press
D
while watching a normal TV
broadcast, you will see a time display from the broadcaster�
It will remain on the screen for about 5 seconds�
21:56:25
9:56 and 25 seconds p.m.
Subtitles
1
Press
h
on the remote control to display the current
Subtitle status� While this status is displayed, press
again to change the setting�
2
If you switch off the TV, the
Subtitle
mode will be
remembered the next time the TV is switched ON�
Note:
If
Subtitle
is On, the TV will always display subtitles
whenever such information is available for the
channel you are viewing. In DTV mode, you may
use on-screen information to check if subtitles are
currently available.
Содержание 46WL700A
Страница 80: ......