background image

English

   - 15 -

Available networks

When the WLAN function is turned on, available 

wireless networks will be listed. Highlight 

See all

 and 

press 

OK

 to see all networks. Select one and press 

OK

 

to connect. You may be asked to enter a password to 

connect to the selected network, in case the network 

is password protected. Additionally you can add new 

networks by using the related options.

Other options

Add new network: 

Add networks with hidden SSID’s.

Scanning always available:

 You can let the location 

service and other apps scan for networks, even when 

WLAN function is turned off. Press 

OK

 to turn it on 

and off.

Wow:

 Turn  the  Wake-On-LAN  function  on  and  off. 

This function allows you to turn on or awaken your 

TV via network. 

Wol:

 Turn the Wake On WLAN function on and off. 

This function allows you to turn on or awaken your TV 

via wireless network. 

Ethernet

Connected/Not connected:

 Displays the status of 

the internet connection via Ethernet, IP and MAC 

addresses.

Proxy settings:

 Set a HTTP proxy for browser manu-

ally. This proxy may not be used by other apps.

IP settings:

 Configure your TV’s IP settings.

Channel

Channels

Options of this menu may change or become inac-

tive depending on the 

Channel Installation Mode

 

selection.

Channel Installation Mode - Antenna

Channel Scan:

 Start a scan for analogue and digital 

channels. You can press the 

Back

 button to cancel the 

scan. The channels that have already been found will 

be stored in the channel list.

Update Scan:

 Search for updates. Previously added 

channels will not be deleted, but any newly found 

channels will be stored in the channel list.

Analog Manual Scan: 

Start a manual scan for ana-

logue channels. Enter the 

Start Frequency

 and then 

select 

Scan Up

 or 

Scan Down

. When a channel is 

found the scan will be completed and the found channel 

will be stored in the channel list.

Single RF Scan: 

Select the 

RF Channel

 by using 

the Right/Left directional buttons. 

Signal Level

 and 

Signal Quality

 of the selected channel will be shown. 

Press 

OK

 to start scan on the selected RF channel. 

The found channels will be stored in the channel list.

Manual Service Update:

 Start a service update 

manually.

LCN:

 Set your preference for LCN. LCN is the Logical 

Channel Number system that organizes available 

broadcasts in accordance with a recognizable channel 

number sequence (if available).

Channel Scan Type:

 Set your scan type preference. 

Channel Store Type: 

Set your store type preference. 

Favorite Network Select:

 Select your favourite net-

work. This menu option will be active, if more than only 

one network is available.

Channel Skip:

 Set channels to be skipped when 

switching the channels via 

Pro/-

 buttons 

on the remote. Highlight the desired channel/s on the 

list and press 

OK

 to select/unselect.

Channel Sort:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

the first selected channel will be moved to the position 

of that channel.

Channel Edit:

 Edit channels in the channel list. Edit 

the name and channel number of the selected channel 

and display 

Network Name

Frequency

Color Sys-

tem

 and 

Sound System 

informations related to that 

channel if available. Depending on the channel other 

options may also be editable. You can press the 

Blue

 

button to delete the highlighted channel.

Analog Channel Fine-tune:

 Fine-tune an analogue 

channel. A list of available analogue channels will be 

displayed. Select the desired one from the list and 

press 

OK

 button. Then change the frequency of the 

channel by pressing Left/Right directional buttons. 

Press 

OK

 to store the new frequency for that channel. 

Press 

Back

 to cancel. This item may not be visible, 

depending on whether or not the last watched channel 

was analogue.

Clear Channel List:

 Delete all channels stored in the 

channel list of the selected channel installation mode. 

A dialogue will be displayed for confirmation. Highlight 

OK

 and press 

OK

 button to proceed. Highlight 

Cancel

 

and press 

OK

 to cancel.

Channel Installation Mode - Cable

Channel Scan:

 Start a scan for analogue and digital 

cable channels. If available, operator options will be 

listed. Select the desired one and press 

OK

Scan 

Mode

Channel Scan Type

Frequency

 and 

Network 

ID

 options may be available. The options may vary 

Содержание 43UA3A Series



































Отзывы: