background image

Toshiba 42/46XV550A

25

Using the TV’s features (General)

Using REGZA-LINK

This feature uses CEC (Consumer Electronics Controls) 
technology and allows the control of Toshiba REGZA-LINK 
compatible devices from the TV remote control via HDMI 
connection (

-

 page 38).

Note:

Not all Toshiba products currently support REGZA-LINK.

REGZA-LINK Setup

1

Press 

M

 and 

Y

 or 

Z

 to select the 

REGZA-LINK

 menu.

2

Press 

V

 or 

U

 to select 

Enable REGZA-LINK

, and then 

press 

Y

 or 

Z

 to select 

On

.

Note:

If you set 

Enable REGZA-LINK

 to 

Off

, then all other items 

will be greyed out.

3

Press 

V

 or 

U

 to select the REGZA-LINK set up item you 

want to use, and press 

Y

 or 

Z

 to select 

On/Off

 or the 

desired speakers mode.

• TV Auto Power On: On/Off
• Auto Standby: On/Off
• Amplifier Control: On/Off
• Speaker Preference: TV Speakers/Amplifier 

REGZA-LINK one touch play

When a connected device is switched on, REGZA-LINK will 
automatically switch the TV to the appropriate HDMI input. 
Also, if the TV is in standby, it will be switched on 
automatically.

These functions can be enabled or disabled from the REGZA-
LINK setup.

Note:

Even if the device is only showing a menu, the TV may 
automatically switch to that input source.

REGZA-LINK system standby

This feature automatically puts the connected device into 
standby when the TV goes into standby and vice versa.

REGZA-LINK system audio control

Using the Speaker Preference feature allows the TV remote 
control to adjust the volume or mute the sound of the speakers 
connected to the TV via an AV amplifier.

Ensure that the connected AV amplifier and REGZA-LINK 
device are selected in the input source selection and that 

Speaker Preference

 is set to 

Amplifier

 in the 

REGZA-

LINK

 setup menu.

Notes:

When you turn on the AV amplifier, change its input source, 
or adjust the sound volume, the sound will be output from 
the AV amplifier’s speakers even if 

TV Speakers

 has been 

selected for 

Speaker Preference

. Turn the TV first to 

standby and then on again to output the sound from the TV 
speakers.

The proper function may not work when operating the AV 
Amplifier.

REGZA-LINK functions

When 

Enable REGZA-LINK

 is set to 

On

, the following 

functions can be enabled by setting them to 

On

.

TV Auto Power On

The 

TV Auto Power On

 setting allows the TV to be 

automatically switched on if a REGZA-LINK device is turned 
on.

Auto Standby

If 

Auto Standby

 is enabled, the TV, when switched off, will 

automatically switch off (put into standby mode) all connected 
REGZA-LINK devices.

Amplifier Control

When 

Amplifier Control

 is set to 

On

, it allows the “Speaker 

Preference” feature to become available.

Speaker Preference

This feature allows the Speaker Preference to be set to 

TV 

Speakers

 or 

Amplifier

. The Amplifier option allows the 

remote control to adjust or mute the volume of the external 
audio.

Notes:

When you turn on the Amplifier, change its input source, or 
adjust the sound volume, the sound will be output from the 
Amplifier’s speakers even if 

TV Speakers

 has been 

selected. Turn the TV to standby and then on again to output 
the sound from the TV speakers.

The above functions are dependent on the connected 
device and TV setting.

REGZA-LINK

Enable REGZA-LINK

On

TV Auto Power On

Auto Standby

Amplifier Control

Speaker Preference

On

On

On

TV Speakers

Note:

The above functions are dependent on the connected device 
and TV setting.

Asia_4246XV550A.book  Page 25  Tuesday, September 16, 2008  3:03 PM

Содержание 42RV550A























































Отзывы: