Toshiba 42LX177 - 42" LCD TV, Руководство пользователя

Страница: 45 / 118

45
LX177 (E/F) Web 213:276
Chapter 5: Setting up your TV
4
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Program
to bring up the
Start
, and press
T
again to begin channel programming.
The TV will automatically cycle through all the antenna
channels, and store all active channels in the channel
memory. While the TV is cycling through the channels,
the message “Scanning channels, please wait” appears (as
shown above).
5
To cancel channel programming, press
O
on the remote
control (or highlight
Abort
in the on-screen display and
press
T
).
When channel programming is finished, press
<
or
,
to
view the programmed channels.
Manually adding and deleting channels
in the channel memory
After automatically programming channels into the channel
memory, you can manually add or delete individual channels.
To add or delete channels in the channel memory:
1
Press
Y
and open the
Setup
menu.
2
Highlight Installation and press
T
.
3
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Add/Delete , and then press
T
.
To add a channel to the channel memory:
Highlight the unchecked box next to the channel number you
want to add, and then press
T
to check the box.
To manually add digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash (
=
) on the remote
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be checked.
If the channel is not found, a message will appear.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press
T
to uncheck the box.
To save your new settings:
Highlight Done and press
T
.
To revert to your original settings:
Highlight Cancel and press
T
before saving.
To remove all channels from the channel memory:
Highlight
Reset
and press
T
, and then highlight
Done
and
press
T
.
To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel list
by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tunes to an encrypted channel, the
following message will appear.
Press “
1
” button while the message is on the screen to
remove the unnecessary channel from the channel list.
Start
Installation
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
Terrestrial
ANT Antenna
Scanning channels, please wait ...
Number of Channels Found - 73
Scanning Digital Channels
Found Channel - 118
Abort
52%
Input Configuration
Terrestrial
Channel Program
Channel Add/Delete
Signal Meter
Installation
Channel Add/Delete
2
Analog
Reset
Cancel
Done
2-1 Digital
Digital
Digital
Digital
2-2
3 Analog
4
Analog
5
6
Analog
7 Analog
7-1
8 Analog
Digital Channel Is Encrypted - Press 1 on remote to remove channel
42LX177_EN.book Page 45 Tuesday, May 15, 2007 1:58 PM