– 8 –
Remote Control
POWER turns the TV on and off.
SLEEP allows access to the automatic TV shut-off function .
LIGHT The first press of the LIGHT button lights the keypad and turns on
the Illumination mode. With the Illumination mode on, pressing any
other key lights the keypad for 5 seconds (10 seconds if you’re in
programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100) allow direct access to channels.
MODE cycles through the six device modes: TV, CABLE/SAT, VCR, DVD,
AUDIO1, and AUDIO2. The mode indicator light will remain lit for a
few seconds.
PIC SIZE cycles through the five pictures sizes: Natural, Theater Wide 1,
2, 3, and Full.
FAVORITE allows access to the favorite channel search function
.
MENU allows access to on-screen programming menus.
ENTER sets programming menu information.
select or adjust programming menus.
FAV
cycles through favorite channels.
CH
cycles through programmed channels.
VOL
adjusts the volume level.
EXIT exits the programming menus.
INPUT selects the video input source.
MUTE mutes the sound.
RECALL displays on-screen information.
CH RTN returns to the last viewed channels.
POP CH
selects the POP (picture-out-picture) channel.
SPLIT turns the POP feature on and off.
CH SCAN allows access to the programmed channel search function
.
FREEZE freezes the POP picture.
SWAP switches the main and POP pictures.
POP DIRECT CH allows direct access to POP channels
.
SOURCE selects the POP picture source.
Note:
The error message "Not Available" will appear
if you press a key for a function that is not
available.