Toshiba 42AV500P, Руководство по обслуживанию

Страница: 48 / 132

E.g. If Bit D7-0 = 0 1 0 1 1 0 1 0, Hex data is 0x 5A .
Exit from Service Mode
Pressing POWER button to turn off the TV once.
Setting Data of Signal Unit
After replacing Main board, the following initialization is required.
Note:
In case initialization by setting wrong PANEL is done, there is a possibility of abnormal
display.
1) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
7 0 1 1 1
8 1 0 0 0
9 1 0 0 1
A 1 0 1 0
B 1 0 1 1
C 1 1 0 0
D 1 1 0 1
E 1 1 1 0
F 1 1 1 1
CAUTION: Whenever using new Main board to the set, setting the PANEL
data according to Panel option data.