manualshive.com logo in svg

Toshiba 420CD, Руководство пользователя

Поделиться
Скачать
Toshiba 420CD Скачать руководство пользователя страница 96

3-50

420 Series

3.23 Floppy Disk Drive Utilities

3.23.1

Function Description

This function formats the FDD, copies the floppy disk and displays the dump list for both the
FDD and HDD.

1.

FORMAT

NOTE:  This program is only for testing a floppy disk drive.  The option is
different from the Toshiba MS-DOS FORMAT command.

This program can format a 5.25-inch or 3.5-inch floppy disk in the following
formats:

(a)

2D:  Double-sided, double-density, 48/67.5 TPI, MFM mode, 512 bytes, 9
sectors/track.

(b)

2DD:  Double-sided, double-density, double-track, 96/135 TPI, MFM mode,
512 bytes, 9 sectors/track.

(c)

2HD:  Double-sided, high-density, double-track, 96/135 TPI, MFM mode,
512 bytes, 18 sectors/track.

2.

COPY

This program copies data from a source floppy disk to a target floppy disk.

3.

DUMP

This program displays the contents of the floppy disk and the designated sectors of
the hard disk on the display.

3.23.2

Operations

1.

Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the
following message:

[ FDD UTILITIES ]

1 - FORMAT
2 - COPY
3 - DUMP
9 - EXIT TO DIAGNOSTICS MENU

2.

FORMAT program

(a)

Selecting FORMAT displays the following message:

Содержание 420CD










































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды