English
- 8 -
Changing Channels and Volume
You can change the channel and adjust the volume
by using the
/-
and
Programme
+/-
buttons
on the remote.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote gently. Insert
two
AAA
batteries. Make sure the (+) and (-) signs
match (observe correct polarity). Place the cover
back on.
1.
3.
2.
Connect Power
IMPORTANT
: The TV set is designed to operate on
220-240V AC, 50 Hz
socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT-TV) socket located on the rear bottom
side of the TV.
Rear bottom side of the TV
Notification
TRADEMARK ACKNOWLEDGMENT
The terms HDMI and High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
YouTube and the YouTube logo are trademarks of
Google Inc.
Specification
TV Broadcasting
PAL BG/I/DK/LL’
SECAM BG/DK
Receiving
Channels
VHF (BAND I/III) - UHF (BAND U) -
HYPERBAND
Digital Reception
Fully integrated digital terrestrial-
cable TV (DVB-T2-C)
Number of Preset
Channels
1,000
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
220-240V AC, 50Hz.
Audio
Nicam Stereo
Audio Output
Power (WRMS.)
(10% THD)
2 x 10 W
Power
Consumption (W)
100 W
Weight (Kg)
10,0 Kg
TV Dimensions
DxLxH (with foot)
(mm)
217 x 912 x 578
TV Dimensions
DxLxH (without
foot) (mm)
51/74 x 912 x 541
Display
16/9 40”
Operation
temperature
and operation
humidity
0ºC up to 40ºC, 85% humidity max
