Toshiba 40T543 DG Series Скачать руководство пользователя страница 37

Страница: 37 / 56

English

- 37 -

English

Using 3D Feature

IMPORTANT:

Before using the 3D feature of your TV, read the

Cautions for 3D

section in the back of the manual.

Operating the 3D Mode “

”

Press the

MENU

button on the remote and select the

Picture

icon using the Left or Right buttons. Press

button to view

Picture Settings

menu. Use Up

or Down buttons to select

3D Settings

and press

to view. For quick acces to

3D Settings

menu just

press the

button on the remote.

Notes:

• You should select suitable

3D Mode

before viewing.

If appropriate mode is not selected, 3D image can

not be correctly displayed.

• The 3D picture may not be visible or become

distorted when watching under intense light

conditions.

• If you experience screen flickering when watching

3D images in poor light conditions, you should turn

the lamp off or dim the light.

• To view 3D contents or programmes in 3D mode

you should wear the active 3D shutter eyewear that

supports Bluetooth™ wireless technology. Note that

this TV’s 3D feature works only with its specific 3D

eyewear.

• Use the 3D eyewear where there is no interference

from other Bluetooth™ or Wireless LAN devices.

LITHIUM BATTERY CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace with the same or equivalent type.

Using the 3D Eyewear

Refer to the manual of the 3D eyewear before use for detailed

information and instructions on usage.

Before using you should pair the eyewear with your

TV. Press the power button on the eyewear

to turn it

on. You can enjoy viewing 3D images now by wearing

the 3D

eyewear. Turn off the eyewear after using it.

The 3D eyewear may not operate correctly at the

outside of the viewing range. Use the 3D eyewear

within the viewing range. The range may be shortened

depending on the obstacles between the TV and the

3D eyewear, or the surrounding environment.

Cleaning and maintenance of the 3D eyewear

• Do not apply spray cleaners directly onto the surface

of the 3D

eyewear.This may result in discoloration

and cracks and may cause the screen display to

peel off.

• Make sure the cleaning cloth is soft and does not

contain any foreign material or dust. Using a dirty

cloth will damage your 3D eyewear.

• Do not drop or bend the 3D eyewear.

Viewing 3D images

Incoming video signals can either be in 2D or 3D

format. A 2D signal can be viewed in either 2D or 3D,

and 3D can be viewed in either 2D or 3D. If the

Mode

option in the

3D Settings

menu is set to

Auto,

the TV can detect the 3D

signal and change to 3D

mode automatically. Otherwise you can change the

viewing mode from the

3D Settings

menu. Press the

button on the remote for quick access to the

Settings

menu.

The format of the 3D signal can be either

Side By Side

(SBS) or

Top Bottom

(TB). You may have to choose

the correct format using the

3D Settings

menu if the

TV can not detect it automatically.

Moreover, when viewing in 2D, you can change 2D

images to 3D images by enabling the

Virtual 3D

option in the

3D Settings

menu.

3D format

Description

Side By Side

(SBS)

Images for the left and right eyes are positioned

side-by-side.

Top Bottom (TB) Images for the left and right eyes are positioned

at the top and bottom of the screen.

Changing 3D format from the Quick menu

Press the

QUICK

button on the remote to open the

quick menu. Press Up or Down buttons to select

Mode

option. Press Left or Right buttons to set

the

3D Mode

Watching 3D images in 2D format

First off all the TV should be in 3D mode. This means

the TV should receive 3D image and

3D Mode

shouldn’t be set to

Off

Game

. Press the

button

on the remote to open

3D Settings

menu quickly.

Select

2D Only

option using the Up or Down buttons.

Press Left or Right buttons to set 2D mode as

Left

Right

Off

Watching 2D images in 3D format

Press the

button on the remote to open

Settings

menu quickly. Select

Virtual 3D

option using

the Up or Down buttons. Press Left or Right buttons

to set as

Low, Medium, High

Off

Switching left and right images

The left and right eye shutter timing of the glasses

can be swapped. If 3D images look blurred, switch

the left and right sides of the 3D image.

Press the

button on the remote to open

Settings

menu quickly. Select

Left/Right Swap

option

using the Up or Down buttons. Press Left or Right

buttons to set as

Left/Right

Right/Left

Содержание 40T543 DG Series

























































Результаты поиска

Содержание 40T543 DG Series

Отзывы:

Похожие инструкции для 40T543 DG Series

Бренды по названию

Популярные бренды

Toshiba 40T543 DG Series, Онлайн-руководство

Результаты поиска

Содержание 40T543 DG Series

Отзывы:

Похожие инструкции для 40T543 DG Series

Бренды по названию

Популярные бренды