53
CONTROLS AND FEATURES
Engl
ish
When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
following options can be selected or adjusted.
a
In the
PREFERENCES
menu, press
B
or
b
to select
AV Connection
and press
OK
.
b
Press
B
or
b
to select
Digital Audio Output
.
c
Press
OK
to display
Digital Audio Output
menu and
press
B
or
b
to select an option.
Audio Format:
Press
C
or
c
to select
PCM
or
Auto
.
PCM:
This mode outputs PCM format to the digital
audio output socket.
Auto:
This mode outputs Dolby Digital (if available)
or PCM to the digital audio output socket.
Dolby Digital
S
Dolby Digital
Dolby Digital Plus
S
Dolby Digital
MPEG
S
PCM
HE-AAC
S
Dolby Digital
Audio Delay:
Press
C
or
c
to select
Auto
or
Manual
.
Auto:
This mode automatically adjusts the audio
timing to meet the video timing.
NOTE:
The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select
Manual
.
Manual:
You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment:
Press
C
or
c
to adjust the audio signal timing
(0 – 250ms) to meet the video signal timing.
NOTE:
• This feature is grayed out when
Audio Delay
is in
Auto
.
• A time lag will occur when the video signal or audio
signal is changed. Adjust the timing accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.
• Depending on the connected equipment (amplifier,
etc.), adjustment may not be possible.
• When the optical digital output setting (Auto
t
PCM)
is changed, it may be necessary to adjust the timing
again.
• Do not use other than for audio output from the AV
amplifier, etc. (Malfunction may occur)
Digital Audio Output
AV Connection
Input Labeling
Digital Audio Output
