22
Using the TV’s features
Using the Cinema Mode
A movie fi lm’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that you
enjoy watching on TV at home runs at 30 (NTSC)
or 25 (PAL) frames a second. To convert this signal
to reproduce a smooth motion and picture quality,
select the On mode.
Eff ective signal and setup conditions:
•
When the Video input mode is selected.
•
When the input signal format is 480i, 576i or 1080i
signals.
1
From the
Picture Settings
menu, press
or
to select
Cinema Mode
.
2
Press
or
to select
On
or
Off
.
NOTE:
When a DVD movie with subtitle is playing back, this
mode may not work correctly.
Adjusting the Colour Temperature
Colour Temperature
increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the
Picture Settings
menu, press
or
to select
Colour Temperature
, then press
OK
.
2
Press
or
to select
Auto
,
Cool
,
Natural
, or
Warm
to suit your preference.
Cool
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
Reset
0
0
0
3
Press
or
to select
Red Level
,
Green Level
or
Blue Level
, then press
or
to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temperature
settings to the factory settings.
1
From the
Colour Temperature
menu, press
or
to select
Reset
, then press
OK
.
2
A confi rmation message will appear. Press
or
to select
Yes
, and then press
OK
.
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the
Picture Settings
menu, press
or
to select
Noise Reduction
, and then press
OK
.
On
Auto
Auto
Noise Reduction
Auto Clean
MPEG NR
DNR
2
Select
Auto Clean
, and then press
or
to
select
On
or
Off
.
Off mode :
MPEG NR
menu and
DNR
menu are available.
• MPEG NR
mode:
Low
,
Middle
,
High
or
Off
• DNR
(Digital Noise Reduction) mode:
Low
,
Middle
,
High
or
Off
Resetting the Picture Settings
This feature resets the
Picture Settings
to the
factory settings.
NOTE:
If no picture settings have been changed,
Reset
is not
available.
1
From the
Picture Settings
menu, press
or
to select
Reset
, and then press
OK
.
2
A confi rmation message will appear. Press
or
to select
Yes
, and then press
OK
.
Using the Lighting Type
Set the ambient light environment to help
Intelligent Auto View
function more eff ectively.
•
This can be set when
Picture Mode
is set to
Intelligent Auto View
.
1
From the
PICTURE
menu, press
or
to
select
Lighting Type
.
2
Press
or
to select
Fluorescent Light
or
Light Bulb
.
405055L5550Series̲EEEV̲En.indd 22
405055L5550Series̲EEEV̲En.indd 22
27/05/18 13:14:57
27/05/18 13:14:57