English
- 10 -
English
Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the wall sock
et.
D
I
H
M
1
SPDIF
Coax.OUT
D
I
H
M
2
HDMI Input
Sockets (*)
RGB/PC
Input
SCART
Socket
DIGITAL AUDIO
Socket
Side View
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM).
YPbPr
Headphone
SIDE AV
SIDE
A
V
YPbPr
5Vdc
Max:500mA
5Vdc
Max:500mA
LAN Input
USB Inputs (*)
Aerial
Input
(*)
Number of these inputs may change according to the model of your TV.
Ae
rial cable:................................................................
Connect the aerial to the ANT. socket on the rear of the TV.
SCART lead:..............................................................
If you use a
decoder*
or a
media recorder
, it is essential
that the scart cable is connected to the TV.
Before running
first time installation
, any connected devices
need to be set to standby mode.
The DIGITAL AUDIO socket enables the connection of a
suitable surround sound system.
HDMI
®
(High-Definition Multimedia Interface)
is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-definition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
Note:
Although this TV is able to connect to HDMI equipment,
it is possible that some equipment may not operate correctly.
When connecting a device via the Side AV input, you must
use the supplied connection cable to enable connection.
When connecting a device via YPbPr input, you must use the
supplied connection cable to enable connection.
LAN
Input is used to connect the TV to your home network.
A wide variety of external equipment can be connected to the
TV; therefore, the relevant owner’s manuals for all additional
equipment must be referred to for exact instructions.
If the TV automatically switches over to monitor external
equipment, return to normal TV by pressing the desired
programme position button. To recall external equipment,
press
“SOURCE
-
”
button repeatedly to switch between
sources.
Regardless of source’s property, audio output from the
DIGITAL AUDIO socket cannot be copied.
