background image

English

   - 5 -

English

Im

portant safety info

rmation 

• Any function 

related to the digital television (with the DVB logo) is available only within the country or area 

where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C signal 

in the area where you live.

• Even if the television conforms to the 

required DVB - T/C

 specifications, the compatibility 

with future digital 

DVB - T/C transmissions is not guaranteed.

• Some digital television functions may not be available in 

certain countries.

• The

 DVB - T/C system present in this device, allows reception of both FTA (Free To Air) and Encrypted 

channels. 

Note; Encrypted channels require a specific encryption system to view, which may not be available in certain 

countries.

• DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with 

European Digital Broadcasting.

IMPORTANT INFORMATION

TV Insta

llation

• 

Do not stand the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Always hold the plug when disconnecting the unit from the socket outlet. Do not pull on flex. The flex can 

become damaged and cause a short circuit.

• Use 

a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the flex.
• If you intend to wall mount the unit, contact the shop where you purchased the unit for advice, and leave the 

installation work to professionals. Improper installation can cause damage and/or injuries.

• To protect the unit during a thunder storm, unplug the AC power cord and disconnect the aerial, cable and 

satellite decoder/systems etc.

Caution:

 Do not touch the aerial connector.

• The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to 

prevent overheating.
The ventilation holes should not be blocked. Do not set up near radiators. Do not place in direct sunshine.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm place.
- When you use the unit in a room where the heater was just turned on.
- When you use the unit in an area where cold air from an air conditioner directly hits the unit.
- When you use the unit in a humid place.

• Never use the unit when moisture condensation could occur.
• Using the unit when moisture condensation exists may damage its own internal parts. After two or three 

hours, the unit will warm up and moisture will be evaporated. 

Содержание 40L1333DG













































Отзывы: