12
Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
!
power indicator lights in red (standby mode).
1
Press
on the remote control or
!
on the
TV right side panel, the
!
power indicator
lights in green.
Note:
If you watch black and white programmes when
the
Colour system
mode is set to Auto, colour
noise may appear on the screen. In this case
select the appropriate
Colour system
(For the
system of each country or region, refer to pages
15, 34).
Switching off the TV
1
Press
on the remote control or
!
on the
TV right side panel to switch to the standby
mode.
Notes:
• When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcast for the day. This function does not
work in external input or Blue screen Off mode.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the
TV after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.
Tuning the TV for the fi rst time
Before switching on the TV, put your decoder
and media recorder to
Standby
, if they are
connected, and ensure that the aerial is
connected. To setup the TV, use the buttons on
the remote control as detailed on page 11.
1
Press the
button. The
Quick Setup
screen will appear. This screen will appear
the fi rst time that the TV is switched on.
Quick Setup
Language
English
2
Press
Y
or
Z
to select the menu language
(English, Chinese (CS), Malay, Thai,
Vietnamese, Russian, Arabic, Persian or
French).
3
Press
Q
, to display the
Location
menu (
-
page 16).
Location
Home
To use the TV for displaying in
a store showroom, please select [Store].
[Home] mode is recommended
for normal use.
4
Press
Y
or
Z
to select
Store
or
Home
. For
normal home use, select
Home
.
5
Press
Q
to display the
Auto tuning
startup
screen. Press
Q
to start the automatic
search.
Auto tuning
Progress
Found
1%
0
When the automatic search is completed,
the TV will automatically appear the
Manual
tuning
menu (
-
page 15).
1
Manual tuning
Pos.
Label
2
3
4
5
6
7
8
6
Closing the
Quick Setup
menu, press
EXIT
.
Note:
The
Quick Setup
menu can also be display at
any time from the
SET UP
menu.
42CV600ET_En.indd 12
42CV600ET_En.indd 12
8/18/2009 1:39:30 PM
8/18/2009 1:39:30 PM
