17
Ref
er
ence
W
elcome to
Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
Selecting the signal source
Use the
TV/VIDEO
button on the remote control or TV to monitor or
change the signal source connected to your TV.
To monitor the signal source:
Press
TV/VIDEO
once. The current signal source displays in green.
To change the signal source:
Repeatedly press
TV/VIDEO
to select either VIDEO 1, VIDEO 2,
VIDEO 3, ColorStream, ANT 1, or ANT 2. The selected signal
source displays in green.
TV
VIDEO 1
VIDEO 2
VIDEO 3
ColorStream
VIDEO 1
VIDEO 2
ANT 1
VIDEO 3
ColorStream ANT
2
Pressing TV/VIDEO
Pressing TV/VIDEO
on the remote control
on the TV
Programming channels into the TV’s memory
When you press
CHANNEL
▲▼
on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note:
To tune the TV to a channel not programmed into the memory,
use the
CHANNEL NUMBERS
on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored automati-
cally, you can manually add or erase individual channels (see page 18).
If you use both ANT-1 and ANT-2 terminals, you will need to program
channels for each signal source.
To program channels automatically:
1. Press
MENU
.
2. Press
x
or
•
to highlight the SET UP menu.
3. Press
y
or
z
to highlight TV/CABLE.
4. Press
x
or
•
to highlight TV (if you use an antenna) or CABLE (if
you use cable).
5. Press
z
to highlight CH PROGRAM.
MOVE SELECT [ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[ANT1] ANT2
[TV]
CABLE
[ADD] ERASE
SET UP
MOVE SELECT [ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
6. Press
x
or
•
to start automatic channel programming (“CH PRO-
GRAM” displays on-screen). The TV automatically cycles through
every TV or cable channel (depending on which you selected), and
stores all active channels in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press
CHANNEL
▲▼
to view the programmed channels.
MENU
y z x •
TV/VIDEO
CHANNEL
y z
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
TV/VIDEO
CH
CH (Channel)
VOL
