English
- 15 -
English
10.
The Auto tuning screen will appear and the
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
The following OSD will be displayed on the screen
and the television will search for the selected
broadcasts:
Note
:
You can press
MENU
button to cancel.
11.
If you select
Satellite
option from the Search Type
screen,
Antenna Type
menu will be displayed.
There are three types of antenna selection. You
can select
Antenna type
as
Direct
,
Unicable
or
DiSEqC.
Direct:
If you have a single receiver and a direct
satellite dish, select this antenna type. After selecting
Direct
, another menu screen will be displayed.
Select an available satellite and press
OK
to scan
for services.
Unicable:
If you have multiple receivers and a
unicable system, select this antenna type. Press
OK
to continue. Configure settings by following
instructions on the screen. Press
OK
to scan for
services.
DiSEqC switch
: If you have multiple satellite
dishes and a
DiSEqC switch
, select this antenna
type. After selecting DiSEqC switch, another
menu screen will be displayed. You can set four
DiSEqC
options (if available). Press
GREEN
button to scan all satellites or press
YELLOW
button to scan only the highlighted satellite. To
save and exit press
OK
button.
After the available stations are stored, Channel List
will be displaye
d on the screen.
If you like the sort
channels, according to the LCN, please select
Yes
and then press
OK
button
(if available).
Auto Tuning
Initial Installation -
continued
•
Press
OK
button to quit channel list and watch TV.
Note
:
Do not turn off the TV while initializing first time
installation.
Keep the menu of Store Mode Disabled and do not
change it, when using at home.
•
Press the
Left
or
Right
button to choose the required
language region.
•
After the Teletext language is selected, press
MENU
but
ton to exit.
Auto Tuning
As new services are broadcast, it will be necessary to
retune the television in order to view them.
•
Auto Tuning will completely retune the television
and can be used to update the channel list. It is
recommended that Auto Tuning is run periodically
to ensure that all new services are added. All current
channels and settings, i.e. locked channels, will
be lost.
•
Press
MENU
button on the remote control and select
Install and Retune
by using
Left
or
Right
button.
Press
OK
button and the following menu screen
will be displayed.
•
Select
Automatic Channel Scan (Retune)
by using
Up
or
Down
button and press
OK
button. Automatic
Channel Scan options will be displayed. You can select
options by using
Up
or
Down
and
OK
buttons.
