Print this page
Service Mode
Self Diagnostic Function
1. Press "9" button on Remote Control during display of adjustment menu in the Service
Mode. The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
Model name : Panel vendor SA : SAMSUNG AU : AUO SH : SHARP
Block:
ADJUSTMENT
(1) Firmware :
Target name and version information.
(2) Time : Total time the TV has been turned on. (Unit : Hours) (Decimal)
The time of Stand-by is not counted.
Min : 000000 max 999999 (unit hour)
(3) Bus line : "OK" is normal.
SCL-GND (Red indication) : SCL-GND short circuit
SDA-GND (Red indication) : SDA-GND short circuit
SCL-SDA (Red indication) : SCL-SDA short circuit
(4) Bus cont : "OK" is normal.
"NG" is abnormal (Red indication).
(5) Block
UV
: TV reception mode
V1 - V8 : VIDEO 1-8 input mode
PC
: PC input
Содержание 32PB1V1
Страница 12: ......
Страница 27: ......
Страница 43: ...Currently there are no updates available Please check back at a later time for any future updates ...