5
Getting started
Accessories List
The following accessories are included with TV:
OWNER’S MANUAL× 1 Base Stand × 2 Remote Control × 1
AAA Battery × 2
Screw × 4
Power Cord × 1 (only for 32" / 43")
Installing the Stand or Wall mount bracket
Installing the Stand
CAUTION
• Be sure to disconnect the A/C power cord before installing a stand
or Wall-Mount brackets.
• The LED display is very fragile, and must be protected at all times
when installing the base stand. Be sure that no hard or sharp
object, or anything that could scratch or damage the LED display,
comes into contact with it. DO NOT exert pressure on the front of
the TV at any time because the screen could crack.
1. Carefully place your TV face-down on a soft, flat surface to
prevent damage to the TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the
stands into the bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in accessory
tightly.
32
"
Base Stand
Screws:
M4×12
Screws: M4×12
Base Stand
43
"
/
49
"
Base Stand
Base Stand
Screws:
M4×40(43")
M4×12(49")
Screws:
M4×40(43")
M4×12(49")
Installing the wall mount bracket (not included)
Wall mount hole pattern VESA (mm)
200 × 200
Wall mount screw size (mm)
M6
8.0~10.0mm(32"/43")
9.5~11.5mm(49")
Wall mount bracket
(not included)
Screw (not included)
Spacer (not included)
Rear cover of the TV
Follow instructions provided with the Wall mount bracket.
NOTE
The diameter and length of the screws differ depending on the wall
mount bracket model.
TV Front
32
"
/ 43
"
/ 49
"
32
"
Joystick button
(
Remote sensor / Power indicator / Standby)
43
"
Joystick button
(
Remote sensor / Power indicator / Standby)
49" Joystick button
(Remote sensor / Power indicator / Standby)
Item
Description
Remote
sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function
may be affected.
Power
indicator
The light is red in standby mode.
Standby /
Source
Press the joystick button to power on the TV. Press
the joystick button twice to power off the TV.
/ Press the joystick button to call up the menu and
then select among the different input signal sources.
VOL + / -
Toggle the joystick button right and left to adjust the
volume.
CH + / -
Toggle the joystick button forward and backward to
control the channel.
NOTE
Powering on the TV requires several seconds to load programmes.
Do not rapidly turn the TV off as it may cause the TV work
abnormally.