19
32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
www.tv.toshiba.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
on page
.
You can connect a cable or satellite box using:
• HDMI (best)
• DVI (same as HDMI but requires an audio connection)
• AV (good)
• Coaxial (good)
HDMI (best)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an HDMI cable (not provided) to one of the
HDMI IN
jacks on the side of your TV and to the
HDMI
OUT
jack
on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
Input Selection
list.
6
Press
or
to highlight
HDMI 1
,
HDMI 2
, or
HDMI 3
, then press
ENTER
.
Note
The 32
"
model does not have an
HDMI IN 3
jack.
Notes
• An HDMI cable carries both audio and video. You do not need to use any
audio cables.
• The 32
"
model does not have the
HDMI 3
option.
HDMI cable
Cable or
satellite box
Side of TV
HDMI cable
connector
HDMI IN
jack
On your TV
Cable
wall jack
