Print this page
Analog - Digital SW update via USB
1. Please copy the files to USB device (root).
mb61_en.bin
mboot.bin
usb_auto_update.txt
2. Turn power to OFF by mechanical switch or removing AC plug. And plug the USB to TV.
3. Keep pressing OK key from remote controller and at the same time turn power to ON by
mechanical SW and keep OK pressed until the stanby led blinks rapidly.
4. When the blinks of led is stopped, TV opens autamatically and release OK button.
FIRMWARE UPDATING PROCEDURE
TOSHIBA WEB-ZEUS
>> terms and conditions
>> privacy policy
Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved.