Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
7
Connecting your TV
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
IN from ANT
VIDEO AUDIO
OUT to TV
CH 3
L
R
CH 4
IN
OUT
ANT( 75 )
ANT-1
OUT
ANT- 2
ON
OFF
CHANNEL IN
AUDIO CENTER
OUT
R
L
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
C
R
C
B
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
VIDEO 1 VIDEO 2
COLOR
STREAM
AUDIO
R
L
Note:
Cables are not supplied with your TV.
Coaxial cable
is the cable that comes in from your antenna, cable TV service,
or cable converter box. Coaxial cable uses “F” connectors.
Standard stereo A/V cables
usually come in sets of three, and are typically
color-coded according to use: yellow for video, red for stereo right audio, and
white for stereo left (or mono) audio. Your TV’s standard A/V inputs are
color-coded in the same manner as the cables.
S-Video cable
is for use with video equipment that has S-Video connectors.
Component video cables
come in sets of three (typically color-coded red,
green, and blue), and are for use with video equipment that has component video
connectors. Your TV’s ColorStream
®
(component video) inputs are color-coded in
the same manner as the cables.
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality:
Use a standard yellow video cable.
For BETTER picture quality:
If your equipment has S-video connectors, use
an S-video cable
instead of
a standard yellow video cable. (You still must
connect the standard red and white audio cables for full system connection,
but
do not connect a standard yellow video cable at the same time
or the
picture performance will be unacceptable.)
For BEST picture quality:
If your equipment has component video
connectors, use component video cables
instead of
a standard yellow video
cable or S-video cable. (You still must connect the standard red and white
audio cables for full system connection.)
CAUTION:
Do not plug in any power cords
until you have finished connecting all equipment.
Coaxial (antenna) cable
Standard stereo A/V cables
(typically color-coded yellow for video,
red and white for audio)
S-video cable
Component video cables
(typically color-coded red, green, blue)
TV
Stereo VCR
Cable lead-in from Cable or Antenna
